买: TOYOTA KEY Maker for 4D chip - Global Car Electronic Co., Ltd

欢迎到

Global Car Electronic Co., Ltd

免费会员

Global Car Electronic Co., Ltd
中国

首页
公司信息
联系我们
贸易商情 [62]
- 买提供 [1]
- 卖提供 [61]
产品目录 [13]
分享您的想法
语言
- English

买

(产品照片)

报价

TOYOTA KEY Maker for 4D chip

规格:	The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol. Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer. The operating step as follows: ( read the using step and the importance notice carefully) 1. Turn the ignition on with the right 4D chip key. 2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the ? ? LED? is on, as well as the anti-light ? ? SEC? which means the car is in the ? ? key programming state? 3. Take away the programmer from OBD. 4. Matches 2 pcs main key and 1 pc vice-key to the IMMO computer Notice: 2 new main key and 1 vice-key are needed to close the programming procedure? a) Close all the car door. b) Insert the first new main key to the ignition for 5 seconds. c) Insert the other main key to the ignition for 5 seconds. d) Insert the vice-key to the ignition for 5 seconds. e) The new ignition key will be confirmed by the new IMMO. Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming) a) Close all the car doors. b) Insert the new key for 5 seconds. c) Insert another new key for 5 seconds. d) Take out the key from ignition e) Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out. f) The new ignition key will be confirmed by IMMO Notice: 1. Must use the right Toyota 4D chip, otherwise you take the consequences. 2. Don? ? t try to open the cover of programmer and dash board 3. This machine is only provided for the legal auto repair.

规格:

The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.

Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.

The operating step as follows: ( read the using step and the importance notice carefully)

1. Turn the ignition on with the right 4D chip key.
2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the ? ? LED? is on, as well as the anti-light ? ? SEC? which means the car is in the ? ? key programming state?
3. Take away the programmer from OBD.
4. Matches 2 pcs main key and 1 pc vice-key to the IMMO computer

Notice: 2 new main key and 1 vice-key are needed to close the programming procedure?

a) Close all the car door.
b) Insert the first new main key to the ignition for 5 seconds.
c) Insert the other main key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.

Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming)

a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO

Notice:

1. Must use the right Toyota 4D chip, otherwise you take the consequences.
2. Don? ? t try to open the cover of programmer and dash board
3. This machine is only provided for the legal auto repair.

推荐给你的朋友的贸易

商户资料
名字：	LussyHuang女士 [销售]
电子邮件：	送信
主页：	http://www.electronic8.com
即時通訊：
手机号码：	0086-(0) 13048809596
电话号码：	0086-755-26751057
电传号码：	0086-755-86157385
城市：	4FL, Building 号18, East 区, Guanlong Village,Xili Town, N鞍山区深圳 518055, 广东中国

要建立你自己的公司网站？
请点击这里！